Description
This wand kit includes one undercoating wand and one rust proofing wand. Please note these wands are designed only for use with RA Adjustable undercoating guns; including: RA1, RA1USA, RA1USA SHORT, RA88. Also includes RA/M and RA/1T models.
Undercoating Wand
For application of undercoating in hard to reach places, i.e., behind mufflers and around exhaust pipes.
- 24 inches long,
- OD 10 MM (3/8")
- ID 5 MM (3/16")
- M11x0.75 thread
- Product ID: RA1UCW
Rustproofing Wand
To atomize rustproofing in hollow beams, cavities and inside doors.
- 32 inches long,
- OD 10 MM (3/8")
- ID 5 MM (3/16")
- M11x0.75 thread
- Product ID: RA1RPW
Undercoating and Rustproofing Wand (1 of each)
- Product ID: RA1SWK
Depending on the viscosity of the sprayed product, a thinner might have to be mixed in (consult product manufacturer for appropriate thinning agent). Some high viscosity products may be too thick to spray through wands. If product is hard to spray through the wand, shortening the wand might help.
Reviews
2 Reviews
-
Fit my spray gun and was delivered quickly
Same as above
-
RA SPRAY WAND
The extension wand worked well and since I was lying down under the vehicle I used it for all the application except inside the frame, etc. The wand with all the holes didn't work as well for me. I used NH Oil Undercoating which was somewhat thick and I think I needed it to be warmer for better flow. I also had to fiddle with the depth at which it was attached to increase flow. I think with a warmer day and more experience it will work better.