The Undercoating/Rustproofing UCPRO Gun builds up pressure inside the tank. This pressure allows for the spraying of thicker products and assures that the rust proofing product is atomized at the tip of the wand to provide total coverage inside the cavity. The gun is recommended for both solvent based and waterborne coatings. The gun is assembled with the undercoating spray cap attached. It can be easily changed to spray cavity wax by changing the spray cap to the quick coupler and attaching the spray nozzle or wand.
Built for industrial use by body shops, car dealerships and undercoating professionals yet can easily be used by any hobbyist or do-it-yourselfer.
- Aluminum tank
- Die cast aluminum body
- Stainless steel needle
- 1/4" NPT air connector
- Tank capacity: 1 liter
- Air consumption: 7 – 10 CFM
- Working pressure: 60- 90 psi
- Weight: 1.07 kg (2.36 lbs)
- Replacement parts available
- Made in Italy
UCPRO : includes rustproofing wand with attachments
Included with spray gun, 5 ft long rustproofing wand with a hand held wand attachment and a mist wand attachment, for hard to reach areas.
This wand is for lighter coatings, i.e., cavity waxes and protective oils and can not be used to spray under coatings.
UCPRO+:includes rustproofing wand attachments and 1 undercoating wand.
Included with spray gun, 5 ft long rustproofing wand with a hand held wand attachment and mist wand attachment, for hard to reach areas (light coatings only).
Undercoating spray wand is designed for hard to reach places while underbody coating.
Please note that some bed liners/floor coatings contain silica or rubber particles to prevent sliding. These coatings can not be sprayed with the Pro or Pro+ Gun.