Product Description
As an Undercoating Gun, this Pro gun was developed to apply protective coatings ie under coatings, sound dampening, thermal insulation, bed liners , corrosion protection etc.
As a Rustproofing Gun it was designed to apply cavity waxes inside doors , beams , rocker panels and other hard to reach cavities.
The Pro Gun builds up pressure inside the tank. This pressure allows for the spraying of thicker products and assures that the rust proofing product is atomized at the tip of the wand to provide total coverage inside the cavity. The gun is recommended for both solvent based and waterborne coatings.
Built for industrial use by Body Shops , Car dealerships and Undercoating professionals yet it can easily be used by any hobbyist or Do-it-yourselfer.
- Aluminum tank
- Die cast aluminum body
- Stainless steel needle
- 1/4" NPT air connector
- Tank capacity: 1 liter
- Air consumption: 7 – 10 CFM
- Working pressure: 60- 90 psi
- Weight: 1.07 kg ( 2.36 lbs)
- Replacement parts available
- Made in Italy
The Undercoating/Rustproofing UCPro Gun builds up pressure inside the tank. This pressure allows for the spraying of thicker products and assures that the rust proofing product is atomized at the tip of the wand to provide total coverage inside the cavity. The gun is recommended for both solvent based and waterborne coatings. The gun is assembled with the undercoating spray cap attached. It can be easily changed to spray cavity wax by changing this spray cap to the quick coupler and attaching the spray nozzle or wand. The rustproofing wand is 5 ft long, and comes with a hand held wand attachment and a mist wand attachment, for hard to reach areas.
Please note that some bed liners/floor coatings contain silica or rubber particles to prevent sliding. These coatings can not be sprayed with the Pro Gun. The Rustproofing wand included with the Pro Gun are for lighter coatings, i.e., cavity waxes and protective oils and can not be used to spray under coatings.