Product Description
Tekton® 34 is a transparent thin liquid anti-corrosion coating for the protection of cavity areas in cars, trucks, coaches, and other objects or places where a rust preventative surface is needed. The product is water-repellent and has very good penetrating properties and a "self-healing" effect. After drying, it becomes a slightly sticky wax coating which has a good temperature resistance up to+160°C/320°F, so it can be used for example in engine compartments. Once dried, if Tekton® 34 is heated by the sun or by engine-heat, it does not have the typical smell of conventional cavity-waxes.
- Wax-based
- Water repellent
- Deeply penetrates crevices
- Does not run or drip
- Can be applied with a brush, spray gun or dipping
- Dries in 2 to 3 hours
- OEM Structure (BMW-Audi-VW-MB)
How to Use:
Shake before use. The surfaces to be treated must be clean, dry, rust-, dust-and grease-free. It can be applied by light airless spray equipment with special nozzles or using an air-mix pistol spray gun with an air pressure of 3-6 bar / 45 to 90 psi. If necessary the product can also be dipped, rolled, or brushed. Depending on the application the product can be thinned with a solvent. Over-spray, or equipment contaminated with over-spray, must be cleaned while still wet with a solvent.
Storage and Shelf Life:
The product may not be stored under +10°C / 50F and above +30°C / 85F. The packaging must be protected from direct sunlight and heat. When stored in a cool, dry, and well-ventilated area, the product has a shelf life of 2 years in unopened, original packaging.
1 case includes 12 cans